2024 Generac Power Systems Diesel Industrial Generator, 25kW SD025T

Information

2024 Generac Power Systems Diesel Industrial Generator, 25kW SD025T

Industrial Generator, 25kW | Diesel | 2.2L

Our factory-built Generac diesel generator engines are easy to maintain and provide extreme endurance. We test every engine in our state-of-the-art lab, so you can be assured it will give you the performance you need each and every time.

Features may include:

GENERATOR ENCLOSUREGENERATOR ENCLOSUREINDUSTRIAL ALTERNATOR
  • Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
POWER ZONE® 410? CONTROLLER
  • Generac Industrial Power engineers its generator controls with safety and convenience as top priorities.

Photos

Highlights

  • Grove, Oklahoma
  • 2024
  • Generac Power Systems
  • Diesel Industrial Generator, 25kW SD025T
  • Piston Type: Aluminum | Crankshaft Type: Forged Steel
  • Ultra Low Sulfur Diesel Fuel
  • Available

Specifications

  • 2024
  • Generac Power Systems
  • Diesel Industrial Generator, 25kW
  • SD025T
  • General
  • Piston Type: Aluminum | Crankshaft Type: Forged Steel
  • Perkins
  • EPA Emissions Compliance: Stationary Emergency | EPA Emissions Reference: See Emission Data Sheet
  • 4 | Cylinder Head: Cast Iron
  • In-Line | Intake Air Method: Turbocharged
  • 135 in3 (2.22 L)
  • 3.3 in (84.0 mm)
  • 3.9 in (100.0 mm)
  • 23.3:1
  • Oil Pump Type: Gear | Oil Filter Type: Full-Flow Cartridge
  • Type: Closed Recovery | Fan Type: Pusher | Water Pump Type: Pre-Lubed, Self Sealing
  • Specifications: ASTM | Filtering (Microns): 5 | Pump Type: Engine Driven Gear
  • Ultra Low Sulfur Diesel Fuel
  • Pump: Distribution Injection Pump | Type: Mechanical
  • Electronic Isochronous | Frequency Regulation (Steady State): ±0.5%
  • Size: See Battery Index 0161970SBY | Voltage: 12 VDC | Ground Polarity: Negative
  • System Voltage: 12 VDC
  • Model: K0025124Y21 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% (3-Phase Only) | Telephone Interference Factor (TIF): < 50 | Standard Excitation: Synchronous Brushless | Bearings: Single Sealed | Coupling: Direct via Flexible Disc | Load Capacity - Standby: 100% | Voltage Regulator Type: Digital | Number of Sensed Phases: All | Regulation Accuracy (Steady State): ±0.25%
  • Cooling: 1,980 RPM
  • Fuel Supply Line: 0.31 in (7.94 mm) | Fuel Return Line: 0.19 in (4.76 mm)
  • 18.0 in (457.2 mm)
  • Crankcase Capacity: 11.2 qt (10.6 L)