2024 Generac Power Systems Diesel Industrial Generator, 30kW SD030T

Information

2024 Generac Power Systems Diesel Industrial Generator, 30kW SD030T

Industrial Generator, 30kW | Diesel | 2.2L

Weird stuff happens…a rodent gets into a transformer, a construction worker takes out a power line, but at the same time you need to stay in business. Generac's line of diesel generators keep your facility operating, no matter the cause of the power disruption.

Features may include:

GENERATOR ENCLOSUREGENERATOR ENCLOSUREINDUSTRIAL ALTERNATOR
  • Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
POWERMANAGER® CONTROLLER
  • Generac engineers its generator controls with safety and convenience as top priorities.

Photos

Highlights

  • Grove, Oklahoma
  • 2024
  • Generac Power Systems
  • Diesel Industrial Generator, 30kW SD030T
  • Piston Type: Aluminum | Crankshaft Type: Forged Steel
  • Ultra Low Sulfur Diesel Fuel #2
  • Available

Specifications

  • 2024
  • Generac Power Systems
  • Diesel Industrial Generator, 30kW
  • SD030T
  • General
  • Piston Type: Aluminum | Crankshaft Type: Forged Steel
  • Perkins
  • EPA Emissions Compliance: Stationary Emergency | EPA Emissions Reference: See Emission Data Sheet
  • 4 | Cylinder Head: Cast Iron
  • In-Line | Intake Air Method: Turbocharged
  • 135 in3 (2.22 L)
  • 3.3 in (84.0 mm)
  • 3.9 in (100.0 mm)
  • 23.3:1
  • Oil Pump Type: Gear | Oil Filter Type: Full-Flow
  • Type: Closed Recovery | Fan Type: Pusher | Water Pump Type: Pre-Lubed, Self Sealing
  • Specifications: ASTM | Filtering (Microns): 5 | Pump Type: Engine Driven Gear
  • Ultra Low Sulfur Diesel Fuel #2
  • Pump: Distribution Injection Pump | Type: Mechanical
  • Electronic Isochronous | Frequency Regulation (Steady State): ±0.5%
  • Size: See Battery Index 0161970SBY | Voltage: 12 VDC | Ground Polarity: Negative
  • System Voltage: 12 VDC
  • Model: K0035124Y21 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% (3-Phase Only) | Telephone Interference Factor (TIF): < 50 | Standard Excitation: Synchronous Brushless | Bearings: Single Sealed | Coupling: Direct via Flexible Disc | Load Capacity - Standby: 100% | Voltage Regulator Type: Digital | Number of Sensed Phases: All | Regulation Accuracy (Steady State): ±0.25%
  • Cooling: 1,980 RPM
  • Fuel Supply Line: 0.31 in (7.9 mm) | Fuel Return Line: 0.2 in (4.8 mm)
  • 18.0 in (457.2 mm)
  • Crankcase Capacity: 11.2 qt (10.6 L)