2025 Generac Power Systems Gaseous Industrial Generator, 230kW SG230

Information

2025 Generac Power Systems Gaseous Industrial Generator, 230kW SG230

230kW Gaseous Generator

Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.

Features may include:

Spark-Ignited Engine
  • Generac builds its spark-ignited engines from the block up utilizing advanced engineering expertise.
Idustrial Alternator
  • Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
POWERMANAGER® Controller
  • Generac engineers its generator controls with safety and convenience as top priorities.

Photos

Highlights

  • Grove, Oklahoma
  • 2025
  • Generac Power Systems
  • Gaseous Industrial Generator, 230kW SG230
  • Piston Type: Aluminum | Crankshaft Type: Ductile Iron | Lifter Type: Solid
  • Natural Gas
  • Available

Specifications

  • 2025
  • Generac Power Systems
  • Gaseous Industrial Generator, 230kW
  • SG230
  • General
  • Piston Type: Aluminum | Crankshaft Type: Ductile Iron | Lifter Type: Solid
  • Generac
  • 6 | Cylinder Head: Cast Iron | Cylinder Liners: Ductile Iron
  • In-line | Intake Air Method: Turbocharged/Aftercooled
  • 864.71 in3 (14.2 L)
  • 5.31 in (135 mm)
  • 6.50 in (165 mm)
  • 9.5:1
  • Electronic
  • Oil Pump Type: Gear | Oil Filter Type: Full-Flow Cartridge
  • Type : Pressurized Closed Recovery | Fan Type: Pusher
  • Natural Gas
  • Electronic | Frequency Regulation (Steady State): ±0.25%
  • Size: See Battery Index 0161970SBY | Voltage: 24 VDC | Ground Polarity: Negative
  • Alternator: 57.5 A
  • System Voltage: 24 VDC
  • Model: K0250124Y21 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% (3-Phase) | Telephone Interference Factor (TIF): <50 | Standard Excitation: Permanent Magnet | Bearings: Sealed Ball | Coupling: Direct via Flexible Disc | Voltage Regulator Type: Full Digital | Regulation Accuracy (Steady State): ±0.25%
  • Cooling: 1,894 RPM
  • Operating Fuel Pressure: 7-11 in H2O (1.7- 2.7 kPa)
  • 30 in (762 mm)
  • Crankcase Capacity: 36.2 qt (34.3 L)
  • Number of Main Bearings: 7 | Connecting Rods: Steel Alloy | Hardened Valve Seats: High Temp Steel Alloy
  • Intake Valve Material: Special Heat-Resistant Steel | Exhaust Valve Material: High Temp Steel Alloy
  • Down Draft